web analytics

Stock Firmware - The Firmwares Place

Database of Android Firmwares & Flash File

How to Flash CPB Stock Firmware Using with YGDP Tool

These are the Instructions to Flash CPB Stock Firmware Using with YGDP Tool any Android Phone or Tablet.

Before Installation Requirements:

Your Android Smartphone must have at least 20-30 percentage of the battery to perform the Installation Process.

How to use YGDP Tool to Flash Stock Firmware

Step no 1: First of All, Download & install the Android Latest USB Drivers on your Computer. If USB Drivers is already installed on your computer or PC then Skip this Step.

Step no 2: Download and install Latest Version of YGDP Tool on your computer.

Step no 3: Now, Run The YGDP Firmware Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Step no 4: Once YGDP Installing Tool is Started, you will be able to see the following below screen:


Step no 5: Now, enter the YGDP Password 369 or 9527 & press Login button.

Step no 6: Once you are able to see the Software main screen of YGDP Tool, then press the Config button.

Step no 7: Then add the CPB File (locate the firmware that you want to install on your android smartphone.

Step no 8: Now Main Step, Click on the Apply button.

Step no 9: After then, connect your Android Phone to the computer or Laptop (make sure it is switched off and battery installed).

Step 10: Now, Press the Start Button to Start the flashing process.


Step 11: Once Flashing Procedure is completed you will be able to see green Upgrade Successful Pop-up message.

Congrats, Now your Android Phone is successfully running the Latest Stock ROM, which you Downloaded.

Stock Firmware - Database of Android Firmware Flash File © 2017