These are Installation Instructions to Flash Stock Firmware RDA Bin File Using the Multi IEdownload Tool on the Windows PC.
Before Flashing Requirements: Your Android Phone must have at least 20 to 30 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware Using with Multi IEdownload Tool
Step no 1: Download & install Latest RDA USB Drivers on your Computer or laptop. If RDA Driver’s are already installed on your Computer then just Skip this Step.
Step no 2: Download And Extract Lates Multi IEdownload Tool on your PC or Computer. After extracting, you will be able to see the following files like below Screen:
Step no 3: Now, Start The Multi_IEdownload_eng.exe.
Step no 4: When Multi IEdownload Tool is Running, you will be able to see the following screen like below Post Screen:
Step no 5: After Then, Press the browse Option and locate the RDA Bin file from your PC.
Step no 6: Now, Just Connect your Device to the computer or laptop (Confirm That the Phone is Switched off & battery is not removed).
Step no 7: After Then, Press Start All button option to Begin the installation or flashing process.
Step o n8: The Flash process will take few minutes like 5 to 10 Minute to Flash the Latest Stock Firmware on your Smartphone. Once Flashing Process is DONE, you will see the success Pop-up message on the Computer screen.
Congratulations, Your Android Smartphone is successfully running the Latest Stock Firmware which you Downloaded.