These are Flashing instructions to Flash Stock Firmware Using with LiveSuit Application on Android Devices.
Before Installation Requirements: Your Android Smartphone should have at least 30 to 40 percent of Mobile battery to perform the Complete Flashing Process.
How to Use LiveSuit Application to Flash Stock Firmware
Step no 1: Download & Install The Latest Android ADB Drivers on your PC.
Step no 2: Download & extract The LiveSuit Application Tool on your computer or Laptop. After Extracting The Zip File, you will be able to see the Below Screen files:
Step no 3: Now Click on LiveSuit.exe from the extracted files.
Step no 4: Once LiveSuit.exe is Started, Choose Yes to follow the Upgrade Wizard.
Step no 5: After Then, You have to Choose the Upgrade Mode which is General & Mandatory. Press The Mandatory to continue.
Step no 6: Now, Unplug All connected Smartphone & tablets from the computer or PC (if your Device already connected), then Tap on Yes button Option to Continue.
Step no 7: Next, You have to select the .img Stock firmware. If you are ready Press Yes Button & choose the firmware.
Step no 8: Now, Do not Click on Finish Button Option.
Step no 9: Then, It is the right time to connect your Android Device or Tablets to the Laptop or Computer using USB Data Cable. Before Connecting the Device, Confirm That its Switch Off.
1stly Connect the USB Data Cable to the Computer then on your Smartphone Device Press & Hold Volume Down Key & Connect the USB Data Cable to it. While holding the Volume Down Button immediately Press The Power Key for 10 times, so that the computer or PC can recognize your phone.
Step no 10: Once your Android Phone is Perfectly recognized by your PC, you able to see the following Screen saying to Mandatory Format the Phone. Click Yes to Continue.
Step no 11: On next Windows, again Press Yes Button option to continue.
Step no 12: Now LiveSuite will Run the flashing process (this process usually takes 5 to 6 minutes to completely DONE).
Step 13: Once Flashing process is completed then you will be able to see Upgrade Succeeds in Pop-up Window. Press OK to Close it.
Step no 14: Now, Exit The LiveSuit Application by Pressing the Exit Button.
Step 15: Disconnect your Android Smartphone from the Computer & Restart it.
Congratulations, Your Device get The latest Firmware using The LiveSuit Application.