web analytics

Stock Firmware - The Firmwares Place

Database of Android Firmwares & Flash File

How to Flash Stock Firmware Using with RockChip Batch Tool

These are Installation Guideline to Flash Stock Firmware Using with RockChip Batch Tool on Android Device.

Before Installation Requirements: Your Android Phone must have at least 30 to 40 percent of mobile battery to perform the Complete Flashing Process.

How to Use RockChip Batch Tool to Flash Stock Firmware

Step no 1: Download & install Latest Rockchip Driver Assistant on your computer or laptop.

Step no 2: Download & extract The Latest RockChip Batch Tool Software on your computer PC. After Extracting The Zip File you will be able to see the Below Screen files:

Step no 3: Now Start RKBatchTool.exe from the extracted files from a computer.

Step no 4: Once RKBatchTool.exe is Started, Press the Box right to the FW Path.

Step no 5: Once you have successfully added the stock firmware, RockChip Tool will load it.

Step no 6: Now, Switch Off your Android Device and tablets.

Step no 7: Now, Keep Hold Volume UP Button on your Phone and connect it to the computer or PC using the USB Data cable.

Step no 8: Don’t release the Volume UP Button on your Device until Icon 1 turns into Green Color.

Step no 9: Once your Phone is Perfectly added to the computer, Press the Restore Button Option to Start the Flashing process.

Step no 10: Now, The RockChip Batch Tool will Install the Stock Firmware on your Android Smartphone or tablets (flashing usually takes 5 to 7 minutes to completely Done).

Step no 13: Once Flashing Procedure is completed then you will be able to see Restore Done Success Pop-up Message.

Step no 14: Now Just, Exit RockChip Batch Tool by Tap on the Exit Button Option.

Step no 15: Disconnect your Android phone from the Computer & Restart it.

Congratulations, Your Phone Get The latest Stock ROM Using with RockChip Tool.

Stock Firmware - Database of Android Firmware Flash File © 2017